Add submodule for neovim config(trixy)

change waybar look

add neovim submodule, delete dracule qutebrowser theme

.config/aerc/accounts.conf

@@ -0,0 +1,7 @@
+[bonsai]
+source        = imaps://brk%40bonsai.cool:jedandvatricetiripet@mail.bonsai.cool
+outgoing      = smtps://brk%40bonsai.cool:jedandvatricetiripet@mail.bonsai.cool
+default       = INBOX
+from          = "Jovan Djokic-Sumarac" <brk@bonsai.cool>
+cache-headers = true
+copy-to	      = Sent

.config/aerc/aerc.conf

@@ -0,0 +1,750 @@
+#
+# aerc main configuration
+
+[general]
+#
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+#unsafe-accounts-conf=false
+
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: date<20,name<17,flags>4,subject<*
+#index-columns=date<20,name<17,flags>4,subject<*
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-date={{.DateAutoFormat .Date.Local}}
+#column-name={{index (.From | names) 0}}
+#column-flags={{.Flags | join ""}}
+#column-subject={{.ThreadPrefix}}{{if .ThreadFolded}}{{printf "{%d}" .ThreadCount}}{{end}}{{.Subject}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)
+#timestamp-format=2006-01-02 03:04 PM
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is not specified, timestamp-format is used instead.
+#
+#this-day-time-format=
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is not specified, timestamp-format is used instead.
+#
+#this-week-time-format=
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is not specified, timestamp-format is used instead.
+#
+#this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 20
+#sidebar-width=20
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+#mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+#dirlist-tree=false
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+#sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: " "
+#border-char-vertical=" "
+#border-char-horizontal=" "
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+styleset-name=dracula
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the mesage threads. Default order is the the intial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+#[ui:account=foo]
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-folded = ""
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+#pager=less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+#edit-headers=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+address-book-cmd=khard email -f -p --remove-first-line %s
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+#text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+#text/html=pandoc -f html -t plain | colorize
+#text/html=html | colorize
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+aerc-startup=aerc :terminal khal interactive && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+#template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

.config/aerc/binds.conf

@@ -0,0 +1,177 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+\[t = :prev-tab<Enter>
+\]t = :next-tab<Enter>
+<C-t> = :term<Enter>
+? = :help keys<Enter>
+<C-c> = :prompt 'Quit?' quit<Enter>
+<C-q> = :prompt 'Quit?' quit<Enter>
+<C-z> = :suspend<Enter>
+
+[messages]
+q = :prompt 'Quit?' quit<Enter>
+
+j = :next<Enter>
+<Down> = :next<Enter>
+<C-d> = :next 50%<Enter>
+<C-f> = :next 100%<Enter>
+<PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+<C-u> = :prev 50%<Enter>
+<C-b> = :prev 100%<Enter>
+<PgUp> = :prev 100%<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+<C-Down> = :next-folder<Enter>
+K = :prev-folder<Enter>
+<C-Up> = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+<C-Left> = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+<C-Right> = :expand-folder<Enter>
+
+v = :mark -t<Enter>
+<Space> = :mark -t<Enter>:next<Enter>
+V = :mark -v<Enter>
+
+T = :toggle-threads<Enter>
+zc = :fold<Enter>
+zo = :unfold<Enter>
+za = :fold -t<Enter>
+zM = :fold -a<Enter>
+zR = :unfold -a<Enter>
+<tab> = :fold -t<Enter>
+
+<Enter> = :view<Enter>
+d = :prompt 'Really delete this message?' 'delete-message'<Enter>
+D = :delete<Enter>
+a = :archive flat<Enter>
+A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
+
+C = :compose<Enter>
+m = :compose<Enter>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+s = :split<Enter>
+S = :vsplit<Enter>
+
+pl = :patch list<Enter>
+pa = :patch apply <Tab>
+pd = :patch drop <Tab>
+pb = :patch rebase<Enter>
+pt = :patch term<Enter>
+ps = :patch switch <Tab>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+o = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-Up> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+<C-Down> = :next-part<Enter>
+J = :next<Enter>
+<C-Right> = :next<Enter>
+K = :prev<Enter>
+<C-Left> = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<A-p> = :switch-account -p<Enter>
+<C-Left> = :switch-account -p<Enter>
+<A-n> = :switch-account -n<Enter>
+<C-Right> = :switch-account -n<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+y = :send<Enter>
+n = :abort<Enter>
+v = :preview<Enter>
+p = :postpone<Enter>
+q = :choose -o d discard abort -o p postpone postpone<Enter>
+e = :edit<Enter>
+a = :attach<space>
+d = :detach<space>
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-PgDn> = :next-tab<Enter>

.config/hypr/hyprland.conf

@@ -31,4 +31,5 @@ exec-once = ~/bin/xdg-portal-hyprland
 exec-once = hypridle
 exec-once = wayland-pipewire-idle-inhibit
 exec-once = dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
+exec-once = foot --server
 #exec-once = hyprpm reload -n

.config/hypr/hyprpaper.conf

@@ -1,7 +1,7 @@
-preload = /home/brk/pics/betta.jpg
+preload = /home/brk/pics/guts_stars.jpg
 
-wallpaper = eDP-1,/home/brk/pics/betta.jpg
-wallpaper = DP-1,/home/brk/pics/betta.jpg
-wallpaper = HDMI-A-1,/home/brk/pics/betta.jpg
+wallpaper = eDP-1,/home/brk/pics/guts_stars.jpg
+wallpaper = DP-1,/home/brk/pics/guts_stars.jpg
+wallpaper = HDMI-A-1,/home/brk/pics/guts_stars.jpg
 
 ipc = off

.config/hypr/keybinds.conf

@@ -1,6 +1,6 @@
 # KEYBINDS
 
-bind =   SUPER,	      N,	exec,	kitty -e nvim
+bind =   SUPER,	      N,	exec,	footclient -e nvim
 
 bind =   SUPER,       Q,        killactive
 bind =   SUPER,       Space,    fullscreen,     1
@@ -8,18 +8,18 @@ bind =   SUPERSHIFT,  Space,    fullscreen,     0
 bind =   SUPERSHIFT,  Q,        exit
 bind =   SUPER,       F,        fakefullscreen
 bind =   SUPERSHIFT,  F,        togglefloating
-bind =   SUPER,       Return,   exec,           kitty
+bind =   SUPER,       Return,   exec,           footclient
 bind =   SUPER,       W,        exec,           thorium-browser --enable-features=UseOzonePlatform,WaylandWindowDecorations --ozone-platform=wayland
-bind =   SUPER,       R,        exec,           kitty -e yazi
+bind =   SUPER,       R,        exec,           footclient -e yazi
 bind =   SUPER,	      D,		exec,			fuzzel
 bind =   SUPER,	      L,		exec,			hyprlock
 bind =   SUPER,       V,        exec,           clippy
 bind =   SUPER,       B,        exec,           killall -SIGUSR1 waybar
 bind =   SUPERSHIFT,  B,        exec,           killall -SIGUSR2 waybar
-bind =   CTRLSHIFT,   Escape,   exec,           kitty --class btoppy -e btop
+bind =   CTRLSHIFT,   Escape,   exec,           footclient --class btoppy -e btop
 bind =   SUPER,       E,        exec,           iwgtk
 bind =   SUPER,       C,        exec,           /usr/bin/discord --enable-features=UseOzonePlatform,WaylandWindowDecorations --ozone-platform=wayland
-bind =   SUPERSHIFT,  E,        exec,           kitty --title blueterm -e bluetuith
+bind =   SUPERSHIFT,  E,        exec,           footclient --title blueterm -e bluetuith
 bind =   SUPER,	      P,		exec,			wlogout --layout ~/.config/wlogout/layout -css ~/.config/wlogout/style.css --protocol layer-shell -b 4 -c 0 -m 0
 
 

.config/kitty/kitty.conf

@@ -1047,7 +1047,7 @@ Color scheme {{{
 
 #: The foreground and background colors.
 
- background_opacity 0.5
+ background_opacity 1.0
 
 #: The opacity of the background. A number between zero and one, where
 #: one is opaque and zero is fully transparent. This will only work if
@@ -1120,8 +1120,28 @@ Color scheme {{{
 #: to be used unchanged. Note that these colors can be overridden by
 #: the program running in the terminal.
 
-#: The color table {{{
-
+: The color table {{{
+    background            #0a0a0a
+    foreground            #d6dae4
+    cursor                #b9b9b9
+    selection_background  #777777
+    color0                #1f1f1f
+    color8                #d6dae4
+    color1                #f71118
+    color9                #de342e
+    color2                #2cc55d
+    color10               #1dd260
+    color3                #ecb90f
+    color11               #f2bd09
+    color4                #2a84d2
+    color12               #0f80d5
+    color5                #4e59b7
+    color13               #524fb9
+    color6                #0f80d5
+    color14               #0f7cda
+    color7                #d6dae4
+    color15               #ffffff
+    selection_foreground  #000000
 #: The 256 terminal colors. There are 8 basic colors, each color has a
 #: dull and bright version, for the first 16 colors. You can set the
 #: remaining 240 colors as color16 to color255.
@@ -1190,7 +1210,7 @@ Color scheme {{{
 
 #: Color for marks of type 3 (violet)
 
-#: }}}
+: }}}
 
 }}}
 

.config/nvim

@@ -0,0 +1 @@
+Subproject commit 15bcef5ea54a7d5fe4e46acfadf4cfb00206cff8

.config/qutebrowser/dracula/INSTALL.md

@@ -1,31 +0,0 @@
-### [qutebrowser](https://www.qutebrowser.org/)
-
-#### Install using Git
-
-If you are a git user, you can install the theme and keep up to date by cloning the repo:
-
-    $ git clone https://github.com/dracula/qutebrowser-dracula-theme.git dracula
-
-#### Install manually
-
-Download using the [GitHub .zip download](https://github.com/dracula/qutebrowser.git) option and unzip.
-
-#### Activating theme
-
-- Find your *[qutebrowser configuration directory](https://www.qutebrowser.org/doc/help/configuring.html#configpy)* (see e.g. `:version` in qutebrowser). This folder should be located at the "config" location listed on qute://version, which is typically ~/.config/qutebrowser/ on Linux, ~/.qutebrowser/ on macOS, and %APPDATA%/qutebrowser/config/ on Windows.
-- Move the repository folder to `dracula` inside the configuration directory.
-- In your [qutebrowser config.py file](https://www.qutebrowser.org/doc/help/configuring.html#configpy), include the following:
-
-```python
-import dracula.draw
-
-# Load existing settings made via :set
-config.load_autoconfig()
-
-dracula.draw.blood(c, {
-    'spacing': {
-        'vertical': 6,
-        'horizontal': 8
-    }
-})
-```

.config/qutebrowser/dracula/draw.py

@@ -1,291 +0,0 @@
-def blood(c, options = {}):
-    palette = {
-        'background': '#222222',
-        'background-alt': '#222222',
-        'background-attention': '#181920',
-        'border': '#282a36',
-        'current-line': '#44475a',
-        'selection': '#44475a',
-        'foreground': '#f8f8f2',
-        'foreground-alt': '#e0e0e0',
-        'foreground-attention': '#ffffff',
-        'comment': '#6272a4',
-        'cyan': '#8be9fd',
-        'green': '#50fa7b',
-        'orange': '#ffb86c',
-        'pink': '#ff79c6',
-        'purple': '#bd93f9',
-        'red': '#ff5555',
-        'yellow': '#f1fa8c'
-    }
-
-    spacing = options.get('spacing', {
-        'vertical': 5,
-        'horizontal': 5
-    })
-
-    padding = options.get('padding', {
-        'top': spacing['vertical'],
-        'right': spacing['horizontal'],
-        'bottom': spacing['vertical'],
-        'left': spacing['horizontal']
-    })
-
-    ## Background color of the completion widget category headers.
-    c.colors.completion.category.bg = palette['background']
-
-    ## Bottom border color of the completion widget category headers.
-    c.colors.completion.category.border.bottom = palette['border']
-
-    ## Top border color of the completion widget category headers.
-    c.colors.completion.category.border.top = palette['border']
-
-    ## Foreground color of completion widget category headers.
-    c.colors.completion.category.fg = palette['foreground']
-
-    ## Background color of the completion widget for even rows.
-    c.colors.completion.even.bg = palette['background']
-
-    ## Background color of the completion widget for odd rows.
-    c.colors.completion.odd.bg = palette['background-alt']
-
-    ## Text color of the completion widget.
-    c.colors.completion.fg = palette['foreground']
-
-    ## Background color of the selected completion item.
-    c.colors.completion.item.selected.bg = palette['selection']
-
-    ## Bottom border color of the selected completion item.
-    c.colors.completion.item.selected.border.bottom = palette['selection']
-
-    ## Top border color of the completion widget category headers.
-    c.colors.completion.item.selected.border.top = palette['selection']
-
-    ## Foreground color of the selected completion item.
-    c.colors.completion.item.selected.fg = palette['foreground']
-
-    ## Foreground color of the matched text in the completion.
-    c.colors.completion.match.fg = palette['orange']
-
-    ## Color of the scrollbar in completion view
-    c.colors.completion.scrollbar.bg = palette['background']
-
-    ## Color of the scrollbar handle in completion view.
-    c.colors.completion.scrollbar.fg = palette['foreground']
-
-    ## Background color for the download bar.
-    c.colors.downloads.bar.bg = palette['background']
-
-    ## Background color for downloads with errors.
-    c.colors.downloads.error.bg = palette['background']
-
-    ## Foreground color for downloads with errors.
-    c.colors.downloads.error.fg = palette['red']
-
-    ## Color gradient stop for download backgrounds.
-    c.colors.downloads.stop.bg = palette['background']
-
-    ## Color gradient interpolation system for download backgrounds.
-    ## Type: ColorSystem
-    ## Valid values:
-    ##   - rgb: Interpolate in the RGB color system.
-    ##   - hsv: Interpolate in the HSV color system.
-    ##   - hsl: Interpolate in the HSL color system.
-    ##   - none: Don't show a gradient.
-    c.colors.downloads.system.bg = 'none'
-
-    ## Background color for hints. Note that you can use a `rgba(...)` value
-    ## for transparency.
-    c.colors.hints.bg = palette['background']
-
-    ## Font color for hints.
-    c.colors.hints.fg = palette['purple']
-
-    ## Hints
-    c.hints.border = '1px solid ' + palette['background-alt']
-
-    ## Font color for the matched part of hints.
-    c.colors.hints.match.fg = palette['foreground-alt']
-
-    ## Background color of the keyhint widget.
-    c.colors.keyhint.bg = palette['background']
-
-    ## Text color for the keyhint widget.
-    c.colors.keyhint.fg = palette['purple']
-
-    ## Highlight color for keys to complete the current keychain.
-    c.colors.keyhint.suffix.fg = palette['selection']
-
-    ## Background color of an error message.
-    c.colors.messages.error.bg = palette['background']
-
-    ## Border color of an error message.
-    c.colors.messages.error.border = palette['background-alt']
-
-    ## Foreground color of an error message.
-    c.colors.messages.error.fg = palette['red']
-
-    ## Background color of an info message.
-    c.colors.messages.info.bg = palette['background']
-
-    ## Border color of an info message.
-    c.colors.messages.info.border = palette['background-alt']
-
-    ## Foreground color an info message.
-    c.colors.messages.info.fg = palette['comment']
-
-    ## Background color of a warning message.
-    c.colors.messages.warning.bg = palette['background']
-
-    ## Border color of a warning message.
-    c.colors.messages.warning.border = palette['background-alt']
-
-    ## Foreground color a warning message.
-    c.colors.messages.warning.fg = palette['red']
-
-    ## Background color for prompts.
-    c.colors.prompts.bg = palette['background']
-
-    # ## Border used around UI elements in prompts.
-    c.colors.prompts.border = '1px solid ' + palette['background-alt']
-
-    ## Foreground color for prompts.
-    c.colors.prompts.fg = palette['cyan']
-
-    ## Background color for the selected item in filename prompts.
-    c.colors.prompts.selected.bg = palette['selection']
-
-    ## Background color of the statusbar in caret mode.
-    c.colors.statusbar.caret.bg = palette['background']
-
-    ## Foreground color of the statusbar in caret mode.
-    c.colors.statusbar.caret.fg = palette['orange']
-
-    ## Background color of the statusbar in caret mode with a selection.
-    c.colors.statusbar.caret.selection.bg = palette['background']
-
-    ## Foreground color of the statusbar in caret mode with a selection.
-    c.colors.statusbar.caret.selection.fg = palette['orange']
-
-    ## Background color of the statusbar in command mode.
-    c.colors.statusbar.command.bg = palette['background']
-
-    ## Foreground color of the statusbar in command mode.
-    c.colors.statusbar.command.fg = palette['pink']
-
-    ## Background color of the statusbar in private browsing + command mode.
-    c.colors.statusbar.command.private.bg = palette['background']
-
-    ## Foreground color of the statusbar in private browsing + command mode.
-    c.colors.statusbar.command.private.fg = palette['foreground-alt']
-
-    ## Background color of the statusbar in insert mode.
-    c.colors.statusbar.insert.bg = palette['background-attention']
-
-    ## Foreground color of the statusbar in insert mode.
-    c.colors.statusbar.insert.fg = palette['foreground-attention']
-
-    ## Background color of the statusbar.
-    c.colors.statusbar.normal.bg = palette['background']
-
-    ## Foreground color of the statusbar.
-    c.colors.statusbar.normal.fg = palette['foreground']
-
-    ## Background color of the statusbar in passthrough mode.
-    c.colors.statusbar.passthrough.bg = palette['background']
-
-    ## Foreground color of the statusbar in passthrough mode.
-    c.colors.statusbar.passthrough.fg = palette['orange']
-
-    ## Background color of the statusbar in private browsing mode.
-    c.colors.statusbar.private.bg = palette['background-alt']
-
-    ## Foreground color of the statusbar in private browsing mode.
-    c.colors.statusbar.private.fg = palette['foreground-alt']
-
-    ## Background color of the progress bar.
-    c.colors.statusbar.progress.bg = palette['background']
-
-    ## Foreground color of the URL in the statusbar on error.
-    c.colors.statusbar.url.error.fg = palette['red']
-
-    ## Default foreground color of the URL in the statusbar.
-    c.colors.statusbar.url.fg = palette['foreground']
-
-    ## Foreground color of the URL in the statusbar for hovered links.
-    c.colors.statusbar.url.hover.fg = palette['cyan']
-
-    ## Foreground color of the URL in the statusbar on successful load
-    c.colors.statusbar.url.success.http.fg = palette['green']
-
-    ## Foreground color of the URL in the statusbar on successful load
-    c.colors.statusbar.url.success.https.fg = palette['green']
-
-    ## Foreground color of the URL in the statusbar when there's a warning.
-    c.colors.statusbar.url.warn.fg = palette['yellow']
-
-    ## Status bar padding
-    c.statusbar.padding = padding
-
-    ## Background color of the tab bar.
-    ## Type: QtColor
-    c.colors.tabs.bar.bg = palette['selection']
-
-    ## Background color of unselected even tabs.
-    ## Type: QtColor
-    c.colors.tabs.even.bg = palette['selection']
-
-    ## Foreground color of unselected even tabs.
-    ## Type: QtColor
-    c.colors.tabs.even.fg = palette['foreground']
-
-    ## Color for the tab indicator on errors.
-    ## Type: QtColor
-    c.colors.tabs.indicator.error = palette['red']
-
-    ## Color gradient start for the tab indicator.
-    ## Type: QtColor
-    c.colors.tabs.indicator.start = palette['orange']
-
-    ## Color gradient end for the tab indicator.
-    ## Type: QtColor
-    c.colors.tabs.indicator.stop = palette['green']
-
-    ## Color gradient interpolation system for the tab indicator.
-    ## Type: ColorSystem
-    ## Valid values:
-    ##   - rgb: Interpolate in the RGB color system.
-    ##   - hsv: Interpolate in the HSV color system.
-    ##   - hsl: Interpolate in the HSL color system.
-    ##   - none: Don't show a gradient.
-    c.colors.tabs.indicator.system = 'none'
-
-    ## Background color of unselected odd tabs.
-    ## Type: QtColor
-    c.colors.tabs.odd.bg = palette['selection']
-
-    ## Foreground color of unselected odd tabs.
-    ## Type: QtColor
-    c.colors.tabs.odd.fg = palette['foreground']
-
-    # ## Background color of selected even tabs.
-    # ## Type: QtColor
-    c.colors.tabs.selected.even.bg = palette['background']
-
-    # ## Foreground color of selected even tabs.
-    # ## Type: QtColor
-    c.colors.tabs.selected.even.fg = palette['foreground']
-
-    # ## Background color of selected odd tabs.
-    # ## Type: QtColor
-    c.colors.tabs.selected.odd.bg = palette['background']
-
-    # ## Foreground color of selected odd tabs.
-    # ## Type: QtColor
-    c.colors.tabs.selected.odd.fg = palette['foreground']
-
-    ## Tab padding
-    c.tabs.padding = padding
-    c.tabs.indicator.width = 1
-    c.tabs.favicons.scale = 1
-

.config/qutebrowser/dracula/readme.md

@@ -1,27 +0,0 @@
-# Dracula for [qutebrowser](https://www.qutebrowser.org/)
-
-> A dark theme for [qutebrowser](https://www.qutebrowser.org/).
-
-![Screenshot](./screenshot.png)
-
-## Install
-
-All instructions can be found at [draculatheme.com/qutebrowser](https://draculatheme.com/qutebrowser).
-
-## Team
-
-This theme is maintained by the following person(s) and a bunch of [awesome contributors](https://github.com/dracula/qutebrowser/graphs/contributors).
-
-| [![Evan Nagle](https://avatars2.githubusercontent.com/u/556537?s=88&v=4&s=70)](https://github.com/evannagle) |
-| ------------------------------------------------------------------------------------------------------------ |
-| [Evan Nagle](https://github.com/evannagle)                                                                   |
-
-## Community
-
-- [Twitter](https://twitter.com/draculatheme) - Best for getting updates about themes and new stuff.
-- [GitHub](https://github.com/dracula/dracula-theme/discussions) - Best for asking questions and discussing issues.
-- [Discord](https://draculatheme.com/discord-invite) - Best for hanging out with the community.
-
-## License
-
-[MIT License](./LICENSE)

.config/waybar/config

@@ -1,10 +1,10 @@
 {
-    "height": 45,
+    "height": 35,
     "layer": "top",
     "position": "top",
-    "modules-left": ["custom/launcher", "custom/pkgs", "custom/temp", "temperature", "custom/cpu", "cpu"],
-    "modules-center": ["hyprland/workspaces"],
-    "modules-right": ["custom/bat", "battery", "custom/net", "network", "custom/clock", "clock"],
+    "modules-left": ["hyprland/workspaces"],
+    "modules-center": [],
+    "modules-right": ["cpu", "temperature", "battery", "network", "clock"],
 
     "wlr/workspaces": {
         "disable-scroll": true,
@@ -56,7 +56,7 @@
 
     "cpu": {
       "interval": 1,
-      "format": "{usage}%",
+      "format": " \t{usage}%",
       "max-length": 7,
       "min-length": 4
     },
@@ -112,10 +112,10 @@
     },
 
     "network": {
-        "format-wifi": "{essid}",
-        "format-ethernet": "LAN",
-        "format-disconnected": " - ",
-        "max-length" : 10
+        "format-wifi": "󰤨   {essid}",
+        "format-ethernet": "󰈀 ",
+        "format-disconnected": "󰌙 ",
+        "max-length" : 20
     },
 
 
@@ -133,13 +133,13 @@
             "critical": 15
         },
         "max-length": 20,
-        "format": "{capacity}%",
-        "format-warning": "{capacity}%",
-        "format-critical": "{capacity}%",
-        "format-charging": "{capacity}%",
-        "format-plugged": "{capacity}%",
+        "format": " {icon} {capacity}%",
+        "format-warning": " {icon} {capacity}%",
+        "format-critical": " {icon} {capacity}%",
+        "format-charging": " {icon} {capacity}%",
+        "format-plugged": " {icon} {capacity}%",
         "format-alt": " {icon}  {time} ",
-        "format-full": "{capacity}%",
+        "format-full": "",
         "format-icons": [" ", " ", " ", " ", " "]
     },
 
@@ -149,7 +149,7 @@
 
     "clock": {
         "format-alt": "<span> </span> {:%a %b %d}",
-        "format": "{:%H:%M}"
+        "format": "󱑓   {:%H:%M}"
     },
 
 

.config/waybar/style.css

@@ -8,11 +8,11 @@
 
 * {
   font-family: FiraCode Mono Nerd Font;
-  font-size: 17px;
+  font-size: 15px;
 }
 
 window#waybar {
-  background-color: rgba(08, 08, 08, 0.5);
+  background-color: #0A0A0A;
   color: @text;
   transition-property: background-color;
   transition-duration: 0.5s;
@@ -27,10 +27,10 @@ window#waybar.hidden {
 
 #workspaces button {
   color: #A9A1E1;
-  background: rgba(19, 19, 19, 0.8);
-  border-radius: 10px;
+  background: #191919;
+  border-radius: 8px;
   padding: 0px 10px 0px 10px;
-  margin: 7px 5px 10px 5px;
+  margin: 10px 5px 10px 5px;
   transition: all 0.3s ease-in-out;
 }
 
@@ -40,11 +40,12 @@ window#waybar.hidden {
 }
 
 #workspaces button.active {
-  color: #191919;
-  background: #A9A1E1;
-  border-radius: 10px;
-  background-size: 200% 200%;
-  transition: all 0.3s ease-in-out;
+  color: #A9A1E1;
+  background: #141414;
+  border-bottom: 2px solid #A9A1E1;
+  border-radius: 8px;
+  padding: 0px 10px 0px 10px;
+  margin: 10px 5px 10px 5px;
 }
 
 #custom-launcher,
@@ -107,16 +108,17 @@ window#waybar.hidden {
 }
 
 #cpu {
-  background-color: @joksi-bg;
+  background: #141414;
   color: #51AFEF;
-  border-radius: 0px 10px 10px 0px;
+  border-radius: 8px 0px 0px 8px;
+  border-bottom: 2px solid #51AFEF;
   padding: 0px 10px 0px 10px;
-  margin: 7px 0px 10px 0px;
+  margin: 10px 0px 10px 0px;
 
 }
 
 #custom-temp {
-  background-color: #51AFEF;
+  background: #141414;
   color: @joksi-bg;
   border-radius: 10px 0px 0px 10px;
   padding: 0px 10px 0px 10px;
@@ -127,11 +129,12 @@ window#waybar.hidden {
 
 
 #temperature {
-  background-color: @joksi-bg;
+  background: #141414;
   color: #51AFEF;
-  border-radius: 0px 10px 10px 0px;
+  border-bottom: 2px solid #51AFEF;
+  border-radius: 0px 8px 8px 0px;
   padding: 0px 10px 0px 10px;
-  margin: 7px 0px 10px 0px;
+  margin: 10px 5px 10px 0px;
 
 }
 
@@ -166,11 +169,12 @@ window#waybar.hidden {
 }
 
 #network {
-  background-color: @joksi-bg;
   color: #A9A1E1;
-  border-radius: 0px 10px 10px 0px;
-  padding: 0px 10px 0px 10px;
-  margin: 7px 0px 10px 0px;
+  background: #141414;
+  border-bottom: 2px solid #A9A1E1;
+  border-radius: 8px;
+  padding: 0px 5px 0px 5px;
+  margin: 10px 5px 10px 5px;
   font-size: 15px;
 }
 
@@ -200,17 +204,19 @@ window#waybar.hidden {
   color: @joksi-bg;
   background-color: #98BE65;
   font-size: 20px;
-  border-radius: 10px 0px 0px 10px;
+  border-bottom: 2px solid #98BE65;
+  border-radius: 0px;
   padding: 0px 15px 0px 10px;
   margin: 7px 0px 10px 10px;
 }
 
 #clock {
   padding: 0px 10px 0px 10px;
-  margin: 7px 10px 10px 0px;
+  margin: 10px 5px 10px 5px;
   color: #98BE65;
-  background-color: @joksi-bg;
-  border-radius: 0px 10px 10px 0px;
+  border-bottom: 2px solid #98BE65;
+  border-radius: 8px;
+  background: #141414;
 }
 
 

.gitignore

@@ -0,0 +1,4 @@
+**/*.pyc
+*.pyc
+**/__py*/
+**/qute*/dracula/

.gitmodules

@@ -0,0 +1,3 @@
+[submodule ".config/nvim"]
+	path = .config/nvim
+	url = git@gitlab.com:zeitgeizt/trixy.git