Configure source format

Define the source format as 3.0 (git)

Signed-off-by: Clark Rawlins <clark@bit63.org>

.gitignore

@@ -0,0 +1,2 @@
+timeoutd
+*.o

Makefile

@@ -1,22 +1,11 @@
-CFLAGS = -g -Wall
+CFLAGS=-fomit-frame-pointer -O2 -s -g -Wall -Wno-unused-result
-
+timeoutd:	timeoutd.c Makefile
-timeoutd:	timeoutd.c
+	#$(CC) $(CFLAGS) -o timeoutd timeoutd.c
 	$(CC) $(CFLAGS) -o timeoutd.o -c timeoutd.c -DTIMEOUTDX11
-	$(CC) $(CFLAGS) -o timeoutd timeoutd.o -lX11 -lXss
+	$(CC) $(CFLAGS) -o timeoutd -L/usr/X11R6/lib timeoutd.o -lXss -lXext -lX11
 	
-clean:
-	-rm -f timeoutd timeoutd.o
 
-install:	timeoutd /etc/timeouts
+install:
-	install timeoutd /usr/sbin/timeoutd
+	install -o root -g system -m 2111 timeoutd /usr/etc/timeoutd
-	install timeoutd.8 /usr/share/man/man8
+	install -o man -g info -m 444 timeoutd.8 /usr/man/man8
-	install timeouts.5 /usr/share/man/man5
+	install -o man -g info -m 444 timeouts.5 /usr/man/man5
-
-uninstall:
-	rm /usr/sbin/timeoutd
-	rm /usr/share/man/man8/timeoutd.8
-	rm /usr/share/man/man5/timeouts.5
-	rm /etc/timeouts
-
-/etc/timeouts:
-	install timeouts /etc

README

@@ -14,18 +14,18 @@ your preferred compilation options, then simply:
 
 make
 
-The next step is to install a timeouts file in /etc specifying
+The next step is to install a timeouts file in /usr/etc specifying
 the parameters for each line/user/group combination.  You can use
 the sample file provided in the distribution as a starting point
 after reading the timeoutd.8 and timeouts.5 man pages.
 
-Once you have installed the timeouts file in /etc, you can type:
+Once you have installed the timeouts file in /usr/etc, you can type:
 
 make install
 
 to install the timeoutd binaries and man pages.
 
-Then it is just a matter of running /usr/sbin/timeoutd.  You may want
+Then it is just a matter of running /usr/etc/timeoutd.  You may want
 to add a line to your /etc/rc or /etc/rc.local (or whatever) to run
 timeoutd at boot time.
 
@@ -40,5 +40,5 @@ line in /etc/profile near the top of the file:
 /usr/etc/timeoutd `whoami` `basename \`tty\`` || exit
 
 
-Please send bugs, comments, suggestions to:
+Please sends bugs, comments, suggestions to:
 shanea@bigpond.net.au (Shane Alderton)

VERSION

@@ -0,0 +1 @@
+1.5

debian/.gitignore

@@ -0,0 +1,7 @@
+files
+timeoutd.debhelper.log
+timeoutd.postinst.debhelper
+timeoutd.postrm.debhelper
+timeoutd.prerm.debhelper
+timeoutd.substvars
+timeoutd

debian/changelog

@@ -1,11 +1,11 @@
-timeoutd (1.5-10.1ubuntu1~1.gbp45a983) UNRELEASED; urgency=low
+timeoutd (1.5-10.2) unstable; urgency=low
+  * Non-maintainer upload
+  * Resolve the missing symbol XOpenDisplay by linking with libX11
+  * Update debian/control Standards-Version: 3.9.5 
+  * Ignore files generated by building debian package
+  * Update debian/compat to version 5 
 
-  ** SNAPSHOT build @45a9836343ec6efa904b51360713c52fb623d6d8 **
+ -- Clark Rawlins <clark@bit63.org>  Sun, 14 Dec 2014 09:28:59 -0800
-
-  * UNRELEASED
-  * Fixed local X session handling
-
- -- Shawn Willden <shawn@kahlan.willden.org>  Sun, 04 Jan 2009 23:17:57 -0700
 
 timeoutd (1.5-10.1) unstable; urgency=low
 

debian/compat

@@ -1 +1 @@
-4
+5

debian/control

@@ -2,12 +2,12 @@ Source: timeoutd
 Section: admin
 Priority: extra
 Maintainer: Dennis Stampfer <seppy@debian.org>
-Standards-Version: 3.6.2
+Standards-Version: 3.9.5
 Build-Depends: debhelper (>= 4), libx11-dev, libxss-dev
 
 Package: timeoutd
 Architecture: any
-Depends: ${shlibs:Depends}
+Depends: ${shlibs:Depends}, ${misc:Depends} 
 Conflicts: suidmanager (<< 0.50)
 Description: Flexible user timeout daemon with X11 support
  timeoutd enforces the time restrictions specified for each or all users.

debian/rules

@@ -4,6 +4,9 @@
 
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
+build-arch: build
+
+build-indep: build
 
 build:
 	$(MAKE) timeoutd
@@ -20,7 +23,7 @@ clean:
 install: build
 	dh_testdir
 	dh_testroot
-	dh_clean -k
+	dh_prep
 	dh_installdirs
 
 	# Add here commands to install the package into debian/<packagename>

debian/source/format

@@ -0,0 +1 @@
+3.0 (git)

debian/timeoutd.init.d

@@ -16,6 +16,8 @@ DESC="user timeout daemon"
 
 test -x $DAEMON || exit 0
 
+. /lib/lsb/init-functions
+
 set -e
 
 case "$1" in

dump_wtmp.c

@@ -0,0 +1,68 @@
+#include    <stdio.h>
+#include    <utmp.h>
+#include    <time.h>
+
+main()
+{
+    FILE	*fp;
+    struct utmp	ut;
+    struct tm	*tm;
+    char	user[9];
+    char	host[17];
+    char	line[13];
+
+    if ((fp = fopen(UTMP_FILE, "r")) == NULL)
+    {
+      printf("Could not open wtmp file!");
+      exit(1);
+    }
+
+    /* Go to end of file minus one structure */
+    fseek(fp, -1L * sizeof(struct utmp), SEEK_END);
+
+    while (fread(&ut, sizeof(struct utmp), 1, fp) == 1)
+    {
+      tm = localtime(&ut.ut_time);
+
+/*
+      if (tm->tm_year != now.tm_year || tm->tm_yday != now.tm_yday)
+        break;
+*/
+
+      printf("%02d:%02d type=", tm->tm_hour,tm->tm_min);
+      switch (ut.ut_type)
+      {
+#ifndef SUNOS
+     case RUN_LVL: printf("RUN_LVL");
+     break;
+     case BOOT_TIME: printf("BOOT_TIME");
+     break;
+     case NEW_TIME: printf("NEW_TIME");
+     break;
+     case OLD_TIME: printf("OLD_TIME");
+     break;
+     case INIT_PROCESS: printf("INIT_PROCESS");
+     break;
+     case LOGIN_PROCESS: printf("LOGIN_PROCESS");
+     break;
+     case USER_PROCESS: printf("USER_PROCESS");
+     break;
+     case DEAD_PROCESS: printf("DEAD_PROCESS");
+     break;
+#endif
+     default: printf("UNKNOWN!(type=%d)", ut.ut_type);
+     }
+     strncpy(user, ut.ut_user, 8);
+     user[8] = 0;
+     strncpy(host, ut.ut_host, 16);
+     host[16] = 0;
+     strncpy(line, ut.ut_line, 12);
+     line[12] = 0;
+     printf(" line=%s host=%s user=%s\n", line, host, user);
+
+
+      /* Position the file pointer 2 structures back */
+      if (fseek(fp, -2 * sizeof(struct utmp), SEEK_CUR) < 0) break;
+    }
+    fclose(fp);
+}

timeoutd.8

@@ -54,15 +54,7 @@ to login at that time, or whether they have exceeded their daily time limit.
 When invoked in this way, by passing a username and tty (without the leading
 /dev) on the command line, 
 .B timeoutd 
-returns an exit code and may leave an appropriate message.
+returns one of the following exit codes:
-.SH EXIT STATUS
-When run in daemon mode,
-.B timeoutd
-may exit with an exit status of 1, in case of fatal error, or 0, if it has been
-terminated by another process.
-.PP
-When invoked as a normal command, it will exit
-with one of the following exit codes:
 .IP "0 User is allowed to login
 .IP "1 Fatal error
 .IP "5 Incorrect command line format